Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
モデル: IG7
ブランド: ブランド
包装: ビニール袋、箱、カートン、パレット
生産高: 25000 pcs per month
輸送方法: Ocean,Land,Air
原産地: 中国寧波
についてのサポート: 5000 pcs per week
認証 : CE
ポート: Ningbo,Guangzhou,Yiwu
お支払い方法の種類: L/C,T/T,Paypal,Money Gram,Western Union
インコタームズ: FOB,CFR,CIF,EXW
4Cyl IG7ダコタナバホインジェクターレールLPG CNG
2オーム4気筒IG7ダコタRAILタイプ鉄道インジェクタ の特徴を 次のように:
1.ガス状LPGおよび天然ガス用のレールインジェクター。
2. 0.47 mmストロークのシングルバージョン。
3.アンプと互換性のある2ウェイ内蔵防水コネクタ付きコイル。
4. アルミニウムのボディ。
5.速度と持続時間の点で高性能を達成するのに適した建築技術。
6.ほこりの蓄積にあまり敏感ではありません。
7.高い内部流れの安定性と反復性 。
2オーム4シリンダーIG7ダコタナバホレールインジェクターの全体寸法:
レールタイプIG7ダコタLpg / Cngインジェクターレールの技術的パラメーター:
Characteristic | Unit | Value | Note |
Injector Version | N° of cylinders | 2, 3, 4 |
|
Material body and treatment |
|
Aluminum | |
Relative Pressure | Bar (Psi) | From 0.5 to 2.0 (7 to 29) | Working pressure |
4.5 (65) | Max pressure | ||
Rated voltage (at coil) | Volt | 10.8 - 14.4 |
|
Coil type | by encoding | E2 |
|
Resistance | Q | 2 | ± 5% at T= 25° |
Suggested peak current time (duration) | ms | 2.4 |
|
Suggested holding current (±10%) | A | 1.4 |
|
Cold Starting Requirements |
|
Increase up to 20% the "peak current time" for first cycles when gas temperature is < 10°C | |
Complete OPENING Response Time | ms | 1.7 | (±10% - total injection time 5 ms) ± 5% tested without nozzle at 14V Dp=1bar T= 25°C |
Complete CLOSING Response Time | ms | 1.4 |
|
Minimum injection pulse | ms | 1.8 | tested with 2 mm nozzle diameter at 14V Ap=1 bar T= 25°C |
Stroke | Micron | 470 |
|
Seat Diameter | mm | 3.3 |
|
Static flow rate (with max nozzle O) for 1 single injector at 20°C (with air) | SLPM (sL/min) | 115 | at 1 bar inlet pressure |
170 | at 2 bar inlet pressure | ||
Leakage (tested with air) | cc/h | < 15 |
|
Noise level | dB | T.B.D | ±1 dB Rail Test Condition |
Compatibility with gas |
|
LPG, CNG |
|
Driver Stage |
|
Peak and Hold (PWM) |
|
Coil Connector type |
|
2 way Amp super seal fermale connector with tab contacts | About connecting wire, refer to our drawing, code 114.01.AMP.001 |
Inlet gas fitting for rubber hose | mm | φ10 mm, φ12 mm, φ14 mm, φ16 mm | |
Outlet gas fitting |
|
Calibrated nozzles M8x1 for rubber hose φ4 mm - φ5 mm - φ6 mm | |
Calibrated hole φ range (for nozzles) | φ | From 1.00 to 3.25 mm (0.25 mm step) |
|
Approvals |
|
110R-00 67R-01 (-40°C to +120°C) |
|
Principle of operation |
|
Solenoid valve, Normally closed, Mobile Plunger | |
Power handling capability LPG | HP/cyl | 1 bar up to 40 HP/cyl | |
Power handling capability CNG | HP/cyl | 2 bar up to 35 HP/cyl | |
Coil IP Rating |
|
IP54 |
|
レールタイプ2オーム4シリンダーIG7ダコタレールインジェクターのパッキングショー:
使用方法:
1.空気漏れの不純物を効果的に通過させるために、スプレーレールのインジェクションパイプの前端にフィルターを取り付けることをお勧めします。
不純物や微粒子がレールレールに入らないようにし、3か月または20,000キロメートルフィルターを交換します。
2.最大限の使用を確保するために、レールをできるだけ垂直角度で設置することをお勧めします。
3.スプレーレールのさまざまなモデルに応じて、電気制御設定で対応するスプレーレールタイプを選択する必要があります。
4.エンジンの出力に応じて、適切なノズル直径を選択する必要があります。
あなたの要求に焦点を当て、あなたに最高のソリューションを提供します:
√疑問点がある場合はご連絡ください
√どこかで変更が必要な場合はご連絡ください
√探しているものでない場合は、お問い合わせください
√設計を行う場合はお問い合わせください
ご質問やお問い合わせへようこそ!
製品グループ : LPGCNGインジェクターレール
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.