ホーム > 製品情報 > ソレノイドバルブ > 2オーム4シリンダーIG7ダコタレールインジェクター

2オーム4シリンダーIG7ダコタレールインジェクター

お支払い方法の種類:
L/C,T/T,Paypal,Money Gram,Western Union
インコタームズ:
FOB,CFR,CIF,EXW
最小注文数:
1 Piece/Pieces
輸送方法:
Ocean,Land,Air
ポート:
Ningbo,Guangzhou,Yiwu
  • 製品の説明
Overview
製品の属性

モデルIG7 Dakota

ブランドブランド

供給能力と追加情報

包装ビニール袋、箱、カートン、パレット

生産高25000 pcs per month

輸送方法Ocean,Land,Air

原産地中国寧波

についてのサポート5000 pcs per week

認証 CE

ポートNingbo,Guangzhou,Yiwu

お支払い方法の種類L/C,T/T,Paypal,Money Gram,Western Union

インコタームズFOB,CFR,CIF,EXW

梱包と配送
販売単位:
Piece/Pieces
パッケージ型式:
ビニール袋、箱、カートン、パレット

2オーム4シリンダーIG7ダコタレールインジェクター


2オーム4気筒IG7ダコタRAILタイプ鉄道インジェクタ の特徴を 次のように:

1.ガスLPGおよび天然ガス用のレールインジェクター。

2.ストロークが0.47 mmのシングルバージョン。

3. Ampと互換性のある2ウェイ内蔵防水コネクタ付きコイル。

4. アルミニウムのボディ。

5.速度と時間の点で高性能を達成するのに適した建築技術。

6.汚れの蓄積にあまり敏感ではありません。

7.高い内部流れの安定性と反復性


2オーム4シリンダーIG7ダコタナバホレールインジェクターの全体寸法:

2 Ohm 4 Cylinder IG7 Dakota Rail Injector


RAILタイプIG7 DAKOTA Lpg / Cngインジェクターレールの技術パラメーター:

Characteristic Unit Value Note
Injector Version N° of cylinders 2, 3, 4
Material body and treatment
Aluminum
Relative Pressure Bar (Psi) From 0.5 to 2.0 (7 to 29) Working pressure
4.5 (65) Max pressure
Rated voltage (at coil) Volt 10.8 - 14.4
Coil type by encoding E2
Resistance Q 2 ± 5% at T= 25°
Suggested peak current time (duration) ms 2.4
Suggested holding current (±10%) A 1.4
Cold Starting Requirements
Increase up to 20% the "peak current time" for first cycles when gas temperature is < 10°C
Complete OPENING Response Time ms 1.7 (±10% - total injection time 5 ms) ± 5% tested without nozzle at 14V Dp=1bar T= 25°C
Complete CLOSING Response Time ms 1.4
Minimum injection pulse ms 1.8 tested with 2 mm nozzle diameter at 14V Ap=1 bar T= 25°C
Stroke Micron 470
Seat Diameter mm 3.3
Static flow rate (with max nozzle O) for 1 single injector at 20°C (with air) SLPM (sL/min) 115 at 1 bar inlet pressure
170 at 2 bar inlet pressure
Leakage (tested with air) cc/h < 15
Noise level dB T.B.D ±1 dB Rail Test Condition
Compatibility with gas
LPG, CNG
Driver Stage
Peak and Hold (PWM)
Coil Connector type
2 way Amp super seal fermale connector with tab contacts About connecting wire, refer to our drawing, code 114.01.AMP.001
Inlet gas fitting for rubber hose mm φ10 mm, φ12 mm, φ14 mm, φ16 mm
Outlet gas fitting
Calibrated nozzles M8x1 for rubber hose φ4 mm - φ5 mm - φ6 mm
Calibrated hole φ range (for nozzles) φ From 1.00 to 3.25 mm (0.25 mm step)
Approvals
110R-00 67R-01 (-40°C to +120°C)
Principle of operation
Solenoid valve, Normally closed, Mobile Plunger
Power handling capability LPG HP/cyl 1 bar up to 40 HP/cyl
Power handling capability CNG HP/cyl 2 bar up to 35 HP/cyl
Coil IP Rating
IP54

RAIL Type IG7 DAKOTA 4 Cyl Rail Injector 2.0 Ohmのスペアパーツディスプレイ:

RAIL Type IG7 DAKOTA 4 Cyl Rail Injector 2.0 Ohm

レールタイプ2オーム4シリンダーIG7ダコタレールインジェクターのパッキングショー:

Rail Spa Type 2 Ohm 4 Cylinder IG7 Dakota Rail Injector


使用説明書:

1.空気漏れの不純物を効果的に通過させるために、スプレーレールの注入パイプの前端にフィルターを取り付けることをお勧めします。
不純物や微粒子がレールレールに入るのを防ぎ、フィルターを3か月または20,000キロメートル交換します。

2.最適な使用を保証するために、レールを可能な限り垂直の角度で設置することをお勧めします。

3.スプレーレールの異なるモデルに応じて、電気制御設定で対応するスプレーレールタイプを選択する必要があります。

4.エンジンの出力に応じて、適切なノズル径を選択する必要があります。

あなたの要求に焦点を当て、あなたに最高のソリューションを提供します:

√疑わしい点がある場合はお問い合わせください
√変更が必要な場合はお問い合わせください
√探しているものでない場合はお問い合わせください
√設計を行っている場合はお問い合わせください

ご質問やお問い合わせへようこそ!

製品グループ : ソレノイドバルブ

ホーム > 製品情報 > ソレノイドバルブ > 2オーム4シリンダーIG7ダコタレールインジェクター
この仕入先にメール
  • *タイトル:
  • *に:
    Mr. Brandon Bao
  • *携帯電話:
  • *イーメール:
  • *メッセージ:
    あなたのメッセージは20から8000文字の間でなければなりません
お問い合わせ
*
*
*

ホーム

Product

Phone

私たちに関しては

お問い合わせ

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

送信